ARM IM-AD1 Manual do Utilizador descarregar pdf

1. General description

The LPC2141/42/44/46/48 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S

CPU with real-time emulation and embedded trace support, that combine the

microcontroller with embedded high-speed flash memory ranging from 32 kB to 512 kB. A

128-bit wide memory interface and a unique accelerator architecture enable 32-bit code

execution at the maximum clock rate. For critical code size applications, the alternative

16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.

Due to their tiny size and low power consumption, LPC2141/42/44/46/48 are ideal for

applications where miniaturization is a key requirement, such as access control and

point-of-sale. Serial communications interfaces ranging from a USB 2.0 Full-speed

device, multiple UARTs, SPI, SSP to I

C-bus and on-chip SRAM of 8 kB up to 40 kB,

make these devices very well suited for communication gateways and protocol

converters, soft modems, voice recognition and low end imaging, providing both large

buffer size and high processing power. Various 32-bit timers, single or dual 10-bit ADC(s),

10-bit DAC, PWM channels and 45 fast GPIO lines with up to nine edge or level sensitive

external interrupt pins make these microcontrollers suitable for industrial control and

medical systems.

2. Features and benefits

2.1 Key features

 16-bit/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.

 8 kB to 40 kB of on-chip static RAM and 32 kB to 512 kB of on-chip flash memory.

128-bit wide interface/accelerator enables high-speed 60 MHz operation.

 In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot

loader software. Single flash sector or full chip erase in 400 ms and programming of

256 B in 1 ms.

 EmbeddedICE RT and Embedded Trace interfaces offer real-time debugging with the

on-chip RealMonitor software and high-speed tracing of instruction execution.

 USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM.

In addition, the LPC2146/48 provides 8 kB of on-chip RAM accessible to USB by DMA.

 One or two (LPC2141/42 vs. LPC2144/46/48) 10-bit ADCs provide a total of 6/14

analog inputs, with conversion times as low as 2.44 s per channel.

 Single 10-bit DAC provides variable analog output (LPC2142/44/46/48 only).

 Two 32-bit timers/external event counters (with four capture and four compare

channels each), PWM unit (six outputs) and watchdog.

 Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input.

LPC2141/42/44/46/48

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash

with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Rev. 5 — 12 August 2011 Product data sheet

1 2 3 4 5 6 ... 44 45

LPC2141/42/44/46/48 1

Resumo do Conteúdo

Página 1 - LPC2141/42/44/46/48

1. General descriptionThe LPC2141/42/44/46/48 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trac

Página 2

Página 3

Página 4

Página 5

Página 6

Página 7

Página 8

Página 9

Página 10

Página 11

Página 12

Página 13

Página 14

Página 15

Página 16

Página 17

Página 18

Página 19

Página 20

Página 21

Página 22

Página 23

Página 24

Página 25

Página 26

Página 27

Página 28

Página 29

Página 30

Página 31

Página 32

Página 33

Página 34

Página 35

Página 36

Página 37

Página 38

Página 39

Página 40

Página 41

Página 42

Página 43

Página 44

Página 45

Mais documentos para Redes ARM IM-AD1

Para ver o documento ARM IM-AD1 Guia do Utilizador

ARM IM-AD1 Guia do Utilizador (92 páginas)

Comentários a estes Manuais

Sem comentários

ARM IM-AD1 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Redes ARM IM-AD1. ARM IM-AD1 Product data Manual do Utilizador

Resumo do Conteúdo

Mais documentos para Redes ARM IM-AD1

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ARM IM-AD1